RailPictures.Net Forums

RailPictures.Net Forums (http://www.railpictures.net/forums/index.php)
-   Railroad Photography Forum (http://www.railpictures.net/forums/forumdisplay.php?f=9)
-   -   How much to crop? (http://www.railpictures.net/forums/showthread.php?t=8306)

UP_1995 09-21-2008 12:57 PM

How much to crop?
 
Last night I got booted with oversharpend and today when I got on I got booted with bad crop Im thinking crop the metra cars out on the left side? there are dumpsters on the right plus a car.Sould I add a little more on the bottom and top?
http://www.railpictures.net/viewreje...d=578158&key=0

Save The Wave 09-21-2008 01:46 PM

Most likely, regardless of what you do, the next rejection will be bad angle.
You could try a vertical crop, or if wanting to stay horizontal do like you said and crop the metra car out.
Perhaps it's my poor perspective, but it appears you need some CW rotation. Everything is listing to the left.
And to correct your spelling, there's an 'h' in Thomas.

Noct Foamer 09-21-2008 03:57 PM


I missed seeing Thomas this year? :cry:


Kent in SD


dodi4200 09-21-2008 05:51 PM

I donot think that cropping the Metra cars will get it as it will make the photo lose abreathing area from the left.Mybe avertical crop working.

UP_1995 09-21-2008 08:04 PM

Thanks guys not trying to get of the content of croping but I just got nailed again for oversharpend do you think that the photo is overshappend? I didnt use very much shapen tool here.

asis80 09-21-2008 10:53 PM

There's a bit too much going on here for a wedgie-style-headonish shot, such as you presented. Also, it's a bit tight too. When there's a lot going on, get some sort of elevation or height, if at all possible, and pull back, go wide. As in oversharpening, I can't tell. My PC with my nice $400 HD flatscreen is out of service, it has been for about 5 months, so I've been using Jennifers laptop to process and view. But if I were to guess, on here it does look oversharpened.

Ben

WembYard 09-22-2008 01:16 AM

Definitely over-sharpened, look at the power lines.

For cropping you could try taking some off the left and top but, as "Save The Wave" says, it is not the best angle. I would have tried standing further to the right, but the blue sign on the derailer might well get in the way.

milwman 09-22-2008 11:17 AM

I have shot there not much room to move, I have yet to get a shot in from there to. Trees and cars in the way.

mark woody 09-22-2008 12:41 PM

It appears the screeners liked it cause it is in the DB.

UP_1995 09-22-2008 12:48 PM

Thanks fo your help guys. Is the sun really high at 4:01 pm ?
http://www.railpictures.net/viewreje...&key=408107254

dodi4200 09-22-2008 11:01 PM

High sun rejection not all the times mean that the angel of sun rays is high.In your case the sun is facing the face of the locomotive directly so if you looked to the trucks specially the wheels you can see that its not well lightened.Give it another try but with more low sun angel and alittle more breathing area from the right.

UP_1995 09-22-2008 11:11 PM

Same situation on this photo as decribed?
http://www.railpictures.net/viewreje...&key=168319666

milwman 09-23-2008 11:28 AM

Quote:

Originally Posted by UP_1995
Same situation on this photo as decribed?
http://www.railpictures.net/viewreje...&key=168319666

Forget the high part, Its the lack of light on the trucks, I think its just the clean paint, lack of dirt. try to lighten the shots a bit? Or appeal saying its clean black paint and there lit fine.


All times are GMT. The time now is 03:25 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.